The grid has no edges to contain the tile and the traditional profile to delimit the water drainage slot has been replaced by a temporary template to be eliminated once the installation has been completed: in this way all the visible parts of the drain have been removed and the result is a shower channels model in which only the water flow slot remains visible.

UNSEEN is available on the Esseflow, Nanoflow and Renova collections which maintain all the special features of the traditional versions such as the AISI 316 stainless steel gird, thin bed system perimetric waterproofing thanks to the application of adhesive tape included in the box, the extractable drain, the reduced space under the floor and all the made in Italy quality of our TEA brand.

Consult product data sheet:
953.105.8 – Nanoflow L.300
953.805.8 – Nanoflow L.600
953.305.8 – Nanoflow L.900
6963.105.8 – Esseflow L.300
6963.305.8 – Esseflow L.900
5953.805.8 – Renova L.600

The accurate study of the dimensions in the new bathroom conception has assumed great importance, especially in the engineering parts selection.

The versatility, the small sizes are plus that can make the difference.
To meet these needs, SQUID, the PP space-saving trap, is able to integrate itself perfectly into the bathroom décor.

SQUID, with its minimal wall space, only 43 mm, is ideal for bathroom furniture that need a lot of usable space.

The additional characteristics of SQUID have been carefully studied by OMP TEA to adapt to the space-saving needs of modern and functional bathroom furniture: a minimum encumbrance of the inlet pipe, a wide adjustment range and water seal in conformity with European standards (50 mm) are its main features.

SQUID is completely inspectionable and is available with connection to the overflow.

To complete the range is also available the version for two bowls washbasin.

Consult product data sheet:
1650.500.5 – Space-saving siphon for single washbasins
1650.506.5 – Space-saving siphon for single washbasins with connection to overflow
1652.500.5 – Space-saving siphon for two bowls washbasin

Made of polypropylene, PRAKTIK BAGNO is equipped with a quick coupling eccentric fitting that facilitates wall connection and, further, reduces the trap encumbrance.

Among the features already included in PRAKTIK BAGNO there is also the special reduction that allows the connection to both 1” and 1” ¼ wastes, as well as the special rubber expansion gaskets that guarantee excellent sealing.

PRAKTIK BAGNO is available in a space-saving version, ideal for recovering important spaces in the area under the sink.

PRAKTIK BAGNO thanks to its water seal and water flow, is made in conformity with the European Standards, a peculiarity of the OMP TEA brand.

Consult product data sheet:
2322.241.6
2390.241.6
2126.051.6

The wall drain and the thin bed perimeter waterproofing are the main features of Intramura that make it a technical solution up to the expectations of the modern market.

Made in ABS, Intramura has a lid in AISI 316 stainless steel, smooth or satin, adjustable for floors with thickness from 5 to 30 mm.
It is also available in a version suitable for ceramic coverings, with a special support for applying tiles.

The Intramura installation is particularly easy thanks to the supports for leveling.
The DN40 side outlet, the two additional outlets and the articulated DN50 outlet shank, complete the Intramura technical features.

Consult product data sheet:
975.101.8 – S/Steel cover version
975.102.8 – Tileable version

With a smaller encumbrance (only 70 mm) than to similar products, VEGA EVO is the new trapped waste for shower trays with a 90 mm diameter hole.
VEGA EVO is produced in polypropylene with a chromed ABS covering grid and AISI 316 stainless steel flange and it is equipped with a special gasket with three blades suitable for both acrylic and ceramic shower trays.
The grille, siphon and hair retainer basket are all removable for periodic cleaning and VEGA EVO can be completely inspected, thanks to direct access to the drain pipe.

VEGA EVO, although its small size, is made in conformity with European UNI EN 274 standards : water seal and water flow rate are according to the normative.

Sumisura is the new adjustable shower channels that completes the OMP TEA range of drains for built-in showers .

It is characterized, mainly, by its innovative technical characteristics: in addition to being adjustable in length, it can also be extended thanks to special fittings that, allow you , to compose multiple drains, in a single solution, with a totally customized length.

Sumisura combines a clean and minimal taste, thanks to the small width of its grid, with very high quality technical, constructive and installation characteristics.
The wellness areas and modern design floor showers find in this OMP TEA item a functional and elegant element , with unique dimensional and installation flexibility.

The technical solutions adopted by OMP TEA with Sumisura, make this shower channel adaptable to any roughness of the laying surfaces, reducing the screed thickness as well as obtaining a perfect seal, thanks to the thin bed waterproofing.
The easy maintenance given by the removable siphons that facilitate periodic cleaning, completes the technical features of this unique product.

1. AISI316 stainless steel grid adjustable in height for tiles thickness from 7 to 22 mm
2. Adjustable from 430 minimum to 1200 mm maximum length
3. Thin bed system perimetric waterproofing
4. Removable trap for cleaning
5. Room under floor 80 mm
6. Sliding and adjustable in height supports to ease the installation useful with any length
7. Supplied complete with the cutting template for the channel and grid
8. Special joints allow to assemble more channels to extend the drain length or increase the drainage
capacity
9. Dry-spot: drainage point for the water filtered through the flooring